Paint & Construction

Construction

Cellulose Ether

Redispersible polymer powder (RDP)

Superplasticizer

Calcium Formate

Starch Ether

1. Hydroxypropyl Methyl Cellulose (HPMC)

Hydroxypropyl Methyl Cellulose is a non-ionic type cellulose ether polymer. With special modification, our HPMC can be used to control thickening, water demand, workability, sag resistance and other important properties of the final product. It is widely used as thickener, adhesive, water retention agent, film forming agent and emulsifier in construction, building materials, dispersed coating, cosmetic, medicine, food, leather, ink and paper making, etc.

2. Methyl Hydroxyethyl Cellulose (MHEC)

Methy hydroxyethyl cellulose is a middle degree of polymerization. It can be dissolved in cold water and hot water. Because of its good dispersibility, it won’t stick together. It is mainly used as adhesive protective gelatin, thicker agent and stabilizing agent as well as additives to make emulsion, frozen gelatin, lotion , suppository and tablets.

3. Hydroxyethyl Cellulose (HEC)

Hydroxyethyl cellulose is a nonionic cellulose derivative that dissolves readily in water, either cold or hot. As a nonionic surfactant, HEC has the functions such as thickening, suspension, emulsification, adhesion, film formation, dispersion, water retention, providing protection and so on.

4. Carboxymethyl Cellulose (CMC)

Carboxymethyl Cellulose sodium is a polyanionic cellulose ether. It has good solubility in both hot and cold water. It is used in drilling mud, in detergents as a soil-suspending agent, in resin emulsion paints, adhesives, printing inks, textile sizes, as stabilizer in foods, as protective colloid in general, as pharmaceutic aid (suspending agent; tablet excipient; viscosity-increasing agent).

5. Ethyl Cellulose (EC)

Ethyl Cellulose is mainly used as adhesive for tablets and coatings as well as framework. EC can be made to sol framework. Micro hole film coating for controlled released matrix agent. Also be used as disperse agent, water keeping agent to avoid losing water and deteriorating improving storage.

Resispersible polymer powder is a free-flowing, white powder obtained by spray drying of high polymer Emulsion, it has a good redispersible ability and can be emulsified into stable polymer-emulsion again when mixed with water. Its chemical property is exactly same as the initial emulsion. Widely used in tile adhesive, wall putty, flexible adhesive mortar, skim coating and level ground material.

This product is in line with the national standard GB8076-2008 for the superplasticizer index. It is a green environmental product with good comprehensive index and no pollution, which has high water reduction rate, good dispersion, and excellent adaptability with cement and gypsum, good fluidity.

Calcium formate is the calcium salt of formic acid. It is produced synthetically by reacting calcium oxide or calcium hydroxide with formic acid. It can be used as new type feeding addictive, adaptable for sorts of acidogenic mold inhibitor of feedstuff. It has the function of preventing diarrhea and dysentery and promoting digesting and absorbing. It can be used as quick solidification agent, lubricant agent and early strength agent of cement. It can be widely used in the production of high grade leather and many other chemicals.

Hydroxypropyl starch is a kind of starch ether, with good ability to be applied in construction and building industries. It can improve the performance and optimize the workability of dry mortar by modification the thickness and rheology of dry mortars based on gypsum, cement, lime, etc. It can perform well in neutral and alkaline conditions, and it is compatible with other additives in gypsum-based and cement-based building materials.

Paints & Inks

Hydrocarbon Resin

Nitrocellulose

Polyester Resin

Titanium Dioxide (TiO2)

Composite Titanium Dioxide

1. C5 Aliphatic Resin

C5 Hydrocarbon Resins are light yellow aliphatic resins produced from petroleum. These thermoplastic resins can be produced with a wide range of desirable properties. Depending on the application, they can be tailored for color, softening point, molecular weight, and acidity. It is widely used in adhesive and thermoplastic paint.

2. C9 Aromatic Resin

C9 Hydrocarbon Resins are aromatic thermoplastic resins. Depending on their grade, their color ranges from light yellow to dark brown. C9 Hydrocarbon Resins have a large range of thermal stability and viscosity. They work well with other resins in most formulas, such as EVAs. Due to their low cost and ease of miscibility, they are widely used in industrial grade products. Widely used in adhesive, rubber, paints and printing inks.

3. C5/C9 Copolymer Resin

C5/C9 Copolymerized Hydrocarbon Resins are thermoplastic resins with advantages of the both C5 and C9 hydrocarbon resins: low acid value, great miscibility, waterproof, ethanol resistance, chemical resistance and acid resistance. They improve the formula they are in by providing good thermal stability, weather resistance, protection from ultraviolet degradation and controlled modification of viscosity. C5/C9 Hydrocarbon Resins have an enhanced compatibility in various elastomers and synthetic rubbers.

4. Hydrogenated C5

C5 Hydrogenated Hydrocarbon resin's main raw material is cracking C5 and is obtained by hydrogenation, to achieve high-quality, multi-purpose water-white thermoplastic Hydrocarbon resin.C5 Hydrogenated Hydrocarbon resin is mainly used for hot-melt adhesives, hot melt pressure sensitive adhesive tackifiers, product have the property of good thermal stability, low odor, and good compatibility With SIS, SBS, and E VA.

5. Hydrogenated C9

C9Hydrogenated Hydrocarbon Resin is water-white thermoplastic resin obtained from polymerizing of Aromatic and hydrogenation. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), Styrene Butadiene Styene block copolymer(SBS),Styrene Isoprene Styene block copolymer(SIS).

6. DCPD Resin

DCPD has good activity and solubility using in high-grade rubber with light color and high bromine value. It can be used as modifier, which can reduce the coating costs, reduce the contraction of the epoxy resin, improve the adhesion of coatings, enhanced wettability on color, and improve the coating flow property. This kind of resin can be used in the printing ink to enhance the printing performance.

Nitrocellulose product is produced through a reaction of natural cellulose and nitrating acid. Following by complex washing and stabilizing stages, then add damping agent or plasticizer to make into Nitrocellulose Cotton or Nitrocellulose Chips, or Further, dissolve the Nitrocellulose Cotton and Chips in different solvents to make into Nitrocellulose Solution product.

Polyester resin are the thermosetting polyester resin series which used in powder coating, Hybrid polyester resin, TGIC curing resin and HAA curing resin, three types in all. Each type can be divided into several products which can meet customer’s different requirements on gloss, mechanical properties, texture, and cost performance and so on. The products have advantages of high gloss, good leveling, good mechanical resistance, and excellent weatherability, with stable and reliable quality.

According to the manufacturing process, they mainly classified as sulfuric acid and chlorination titanium dioxide pigments for PVC industrial, paint, ink, rubber and etc.

Composite Titanium Dioxide is a kind of coated inorganic powder by titanium dioxide. Compared with common titanium dioxide, this composite titanium white pigment has almost same functions and properties but with lower cost. No matter the physical or chemical properties, the new type of composite titanium is comparable with titanium dioxide pigment.

Adhesive & Rubber

Hydrocarbon Resin

Modified C9

Phenolic Antioxidant CPD-650

1. C5 Aliphatic Resin

C5 Hydrocarbon Resins are light yellow aliphatic resins produced from petroleum. These thermoplastic resins can be produced with a wide range of desirable properties. Depending on the application, they can be tailored for color, softening point, molecular weight, and acidity. It is widely used in adhesive and thermoplastic paint.

 2. C9 Aromatic Resin

C9 Hydrocarbon Resins are aromatic thermoplastic resins. Depending on their grade, their color ranges from light yellow to dark brown. C9 Hydrocarbon Resins have a large range of thermal stability and viscosity. They work well with other resins in most formulas, such as EVAs. Due to their low cost and ease of miscibility, they are widely used in industrial grade products. Widely used in adhesive, rubber, paints and printing inks.

 3. C5/C9 Copolymer Resin

C5/C9 Copolymerized Hydrocarbon Resins are thermoplastic resins with advantages of the both C5 and C9 hydrocarbon resins: low acid value, great miscibility, waterproof, ethanol resistance, chemical resistance and acid resistance. They improve the formula they are in by providing good thermal stability, weather resistance, protection from ultraviolet degradation and controlled modification of viscosity. C5/C9 Hydrocarbon Resins have an enhanced compatibility in various elastomers and synthetic rubbers.

 4. Hydrogenated C5

C5 Hydrogenated Hydrocarbon resin's main raw material is cracking C5 and is obtained by hydrogenation, to achieve high-quality, multi-purpose water-white thermoplastic Hydrocarbon resin.C5 Hydrogenated Hydrocarbon resin is mainly used for hot-melt adhesives, hot melt pressure sensitive adhesive tackifiers, product have the property of good thermal stability, low odor, and good compatibility With SIS, SBS, and E VA.

 5. Hydrogenated C9

C9Hydrogenated Hydrocarbon Resin is water-white thermoplastic resin obtained from polymerizing of Aromatic and hydrogenation. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), Styrene Butadiene Styene block copolymer(SBS),Styrene Isoprene Styene block copolymer(SIS).

 6. DCPD Resin

DCPD resin has good activity and solubility using in high-grade rubber with light color and high bromine value. It can be used as modifier, which can reduce the coating costs, reduce the contraction of the epoxy resin, improve the adhesion of coatings, enhanced wettability on color, and improve the coating flow property. This kind of resin can be used in the printing ink to enhance the printing performance.

Modified C9 hydrocarbon resin including widely used H series (special unsaturated aromatic C9/C10 hydrocarbons); hotmelts specialized HY series (special unsaturated aromatic C9/C10 hydrocarbons on good compatibility with EVA, SBS, SIS etc); pure monomer resin HM series (white pure monomer resin polymerized largely from alpha-methylstyrene/styrene on good compatibility with EVA etc).

Phenolic Antioxidant CPD-650 is a highly effective, polymeric, non-discoloring phenolic antioxidant. Chemical name: Phenol, 4-methy-, reaction products with disyclopentadiene and isobutylene. High effective polyphenolic antioxidant with low volativity and non-discoloring, non-pinking. Mainly protect light colored, non-staining goods derived from natural rubber and latex, SBR and caboxylated SBR lattice, ABS, NBR, BR, SBS, SIS and so on.

Plastics

Fischer-Tropsch Wax (FT wax)

Polyethylene Wax (PE wax)

Fischer-Tropsch wax is a synthetic wax produced by the polymerization of carbon monoxide under high pressure, a technology used in the emerging natural Gas to Liquid projects. There are several unique characteristics of Fisher-Tropsch wax, like high melting point, low viscosity and excellent hardness, making it ideal choice in a variety of applications.

Polyethylene Wax as processing auxiliary for PVC pipes, road marking adhesive, special-shaped materials, film, wire and cable and other plastics and the ink paste polisher, paper coating and candles. This series of pe wax is the low molecular polyethylene wax. It has high softening points which are similar to the high molecular polyethylene wax, but the melt viscosity and hardness are similar to the paraffin.

Other Product

Glass Beads

Modified Rosin Resin

Gum Rosin

Stearic Acid

Plasticizers (ATBC,TBC)

Water Treatment Agents (HEDP,ATMP)

Reflective glass beads in road signing are mainly used for hot melt reflective road marking paint. It can improve road reticule coating reflection performance, can make the lamp of the reflected light, make the driver to see the direction, improve the driving safety at night performance.

Modified rosin resin include Hydrogenated Rosin: mainly used as raw material for the manufacture of adhesives, coatings, inks, solder flux for electronic industries, food grade ester gum, and etc; water-white Hydrogenated Rosin: this series of products are refined from hydrogenated rosin or high-hydrogenated rosin that are eliminated impurities and the coloring radicals; Disproportionated Rosin: made from gum rosin through catalyzing by the Pd-C catalysts, mainly used in synthetic rubber, adhesives, pigments, dyestuff surfact treatment, coatings, inks, etc.


Gum Rosin is an organic product extracted from Pinus elliotti, and it is naturally formed by the trees sap. The product is obtained by heating and separation of water vapor. Once gum rosin is a natural product, it does not offer risks to the environment and human health.

Stearic acid also called Octadecanoic Acid, is nature’s most common long-chain fatty acid, derived from cegetable fats. Which is widely used Cosmetic Industries, Stabilizers, Candles, Chemicals, Coating, as a lubricant and as an additive in industrial preparations. End use applications paper, plastic, coatings, paint, soaps, detergents, cosmetics, creams, lotions, polishing compounds, lubricants, surface coatings and candles, pharmaceuticals, food packaging. It is also used as a softener, accelerator and dispersing agent in rubbers.

Plasticizer is our response to growing interest in biodegradable plasticizers for PVC processing and cellulose derivates. It is completely safe in terms of CLP classification and in most cases it can substitute phthalate plasticizers.

HEDP is used as scale and corrosion inhibition in circulating cool water system, oil field and low-pressure boilers in fields such as electric power, chemical industry, metallurgy, metallurgy, fertilizer, etc. In light woven industry, HEDP is used as detergent for metal and nonmetal. In dyeing industry, HEDP is used as peroxide stabilizer and dye-fixing agent. Usually, HEDP is used together with polycarboxylic acid.

ATMP is usually used together with organophosphoric acid, polycarboxylic acid and salt to build all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system.

Fenchem

Markets & Products

Contact Us